P Pro HVAC
New Holland, OH · 43145 Ohio · 24/7 line

Furnace Ignition and Pilot Light Repair in New Holland, OH Near Me

Pilot light going out or furnace clicking without lighting in New Holland, OH? Pro HVAC connects you with an HVAC professional. Call (321) 463-9811.

Call (321) 463-9811 More services
Ohio Statewide
Symptom-First Matching
24/7 Emergencies
No Obligation

A furnace that clicks, hums, then falls silent without heat is failing somewhere in its ignition sequence. On newer systems the usual culprits are a cracked or worn hot surface ignitor, a flame sensor coated in oxide so it cannot prove flame, or a pressure switch that will not close because the flue or condensate line is blocked. On older standing-pilot units, a pilot that lights but will not stay lit usually points to a failing thermocouple or a draft reaching the pilot assembly.

These faults follow a diagnosable order and a professional will work through it rather than replacing parts on guesswork. Repeated ignition lockouts should not be reset over and over, since each attempt puts unburned gas into the chamber. Pro HVAC connects homeowners in New Holland, OH with HVAC professionals. Call (321) 463-9811.

How it works

Four simple steps to Furnace Repair in New Holland, OH

01

Tell us the symptom

Tell us what your system is doing in New Holland, OH.

02

Matched to the fault

We match the symptom to a professional who handles that fault.

03

They contact you

They contact you directly to arrange the visit.

04

If it is not right

If they cannot help, tell us and we find another.

Coverage

Furnace Repair Services Across New Holland, OH

Covering New Holland, OH and nearby ZIPs across Ohio.

ZIP codes we serve

43145
Furnace Ignition And Pilot Light Repair in New Holland, OH

Furnace Ignition And Pilot Light Repair FAQs

Frequently asked questions about Furnace Ignition and Pilot Light Repair

Questions we hear most often about Furnace Ignition and Pilot Light Repair in New Holland, OH.

Talk to a real person
Does my furnace have a reset button and how do I use it?
Many furnaces have a red or yellow reset button on the motor housing or control board. Turn power off at the breaker first, locate the button, and press it once. Restore power and test. Avoid repeated resets, as this can mask a serious problem such as a failing motor or overheating limit switch. In New Holland, OH winters, repeated tripping usually means airflow is blocked or the heat exchanger is cracked.
Is it safe to run my furnace if it smells like burning?
A burning smell on first startup in fall is often dust burning off the heat exchanger and may clear after a few hours. Persistent or strong odors can indicate overheating or electrical issues. Turn the thermostat down, switch power off at the breaker, and call (321) 463-9811. Do not keep running the unit in New Holland, OH winter conditions if the smell returns.
What should I do when there is no heat overnight in New Holland, OH winter?
Check the thermostat batteries and confirm the switch is set to heat. Replace the furnace filter if it is dirty, then verify the breaker is on. If the furnace still does not respond, turn the system off at the breaker to prevent further damage. Call (321) 463-9811 for referral to a local technician who can diagnose the issue safely.
Do I need an AC recharge, or do I have a refrigerant leak?
A sealed air conditioning system does not use refrigerant up, so if the charge is low there is a leak somewhere. Cooling that weakens season after season, ice on the line set, or a hissing sound near the indoor unit all point to a leak rather than normal top-up. Adding refrigerant without locating the leak means paying again next season, and running low charge makes the compressor run hot. Ask for the leak to be found and quoted before agreeing to a recharge in New Holland, OH.
Do I need duct cleaning or duct sealing?
They solve different problems. Cleaning is worth doing when there is visible debris at the registers, evidence of rodents or insects, water damage inside the system, or drywall dust left after renovation work. Sealing is what you need when rooms never reach temperature, bills do not match the equipment, or the furnace runs far longer than it should. A musty smell is usually neither, since it normally starts at the evaporator coil or a standing-water condensate pan. Older New Holland, OH homes with retrofitted ductwork more often need sealing than cleaning.

Talk to an Ohio HVAC repair

Need Furnace Repair in New Holland, OH? Call now.

Describe the symptom and we connect you with an Ohio HVAC repair pro for Furnace Repair or Emergency HVAC Repair. Call (321) 463-9811.

Call (321) 463-9811 Browse services
Call (321) 463-9811 Services